Home › Сatalogue › Acid truck tankers › SIN 37.05 KAMAZ-43118 (Sinergiya)

Acid truck tankers SIN 37.05 on KAMAZ-43118 chassis (Sinergiya)

Purchase

Defer

Capacity:	8,2 cubic meters
Pump:	KMH 65-40-200, centrifugal
Chassis:	KAMAZ-43118 (6×6, 280/300 h. p., E-4)
Producer:	Sinergiya

View complete specification

download PDF

trade-in

Services in equipment
re-equipment

We ensure
worldwide delivery

Specifications

Description

Acid truck tanker specifications

Dimensions, mm	8940×2500×3200
Acid truck tanker fully loaded mass, kg	18 200

Pump unit specifications

Type	KMH 65-40-200, centrifugal
Nominal pump capacity, m³/h	14,6...34,0
Pressure, MPa	0,5
Explosion-proof motor	2AIMS 160L2
Rotating speed, rpm	2900
Pump power, kW	15
Power supply, V	380
Pump efficiency, % min	52
Dimensions	820×380×445
Mass, kg	180

KAMAZ-43118 chassis specification

Model
Auxiliary equipment	Towing hitch, Power take off (PTO), Winch (depending on specification)
Brakers
Brake lining width, mm	140
Dimensions: drum Ø, mm	400
Drive	pneumatic
Cab
Configuration	day-cab or sleeper cab (depends on truck configuration)
Type	high or low roof, over the engine (depends on truck configuration)
Characteristic of gvw vehicle
Climbing angle, no less, %	31
Maximum speed, no less, km/h	90
Outer turning radius between walls, m.	11,5–12,9
Clutch
Actuation	hydraulic, with pneumatic booster
Type	diaphragm, single-disk, mod. ZF&SACHS MF 430
Electrical equipment
Batteries, V/A hour	2×12/190
Generator, V/W	28/3000
Voltage, V	24
Engine
Cylinder arrangement and number	V-shaped, 8
Cylinder Ø and piston stroke, mm	120/130
Degree of compression	17
Engine displacement, L	11,76
Fuel feed system	Common Rail
Maximum net horsepower, kW (h. p.)	221 (300)
at crankshaft rotation speed, rpm	1900
Maximum net torque, Nm (kgfm)	1275 (130)
at crankshaft rotation speed, rpm	1300
Model	740.662-300
Type	turbocharged diesel, with aftercooling
Final drive
Ratio	5,94
Transfer case
Control	pneumatic
Type	mechanical, two-speed with interlocking differential
Fuel system
Fuel tank capacity, L	210 or 350 or 210+210 or 350+210 (depending on specification)
Transmission
Control	mechanical, remote control
Gear ratios	1-9,48; 2-6,58; 3-4,68; 4-3,48; 5-2,62; 6-1,89; 7-1,35; 8-1,00; 9-0,75; ЗХ-8,97
Model	ZF 9S1310
Number of gears	9
Weight characteristics and loads
Chassis curb weight, kg	8845...9395 (depending on specification)
Front axle load, kg	4785…5275 (depending on specification)
Rear axle load, kg	3810…4300
Gross combination weight, kg	33600
Gross trailer weight, kg	12000
Gross vehicle with superstructure weight, kg	21600
Rear trailer bogie load, kg	15800
Front axle load, kg	5800
Permissible mass of superstructure with load, kg	12680...12130 (depending on specification)
Wheels and tyres
Rim size	10.00-20 or 12.2-20,9 (depending on specification)
Tyre size	390/95 R20 or 425/85 R21 (depending on specification)
Tyre type	pneumatic, with pressure control
Wheel type	disk wheels

Acid truck tanker SIN 37.05 on KAMAZ-43118 chassis is designed for transportation, temporary storage and pumping of inhibited chlorohydric acid solutions with concentration up to 32%, mud acids (HF content of up to 5%, HCL 21%), KSPO-2, and also alkaline and saline solutions.

Advantages:

Service life is minimum 7 years.
Internal special chemically resistant coating of the tanker increases the strength and provides long-term protection from acid effects. It also makes it possible to carry out washing with hot water or steam under the special regime (Тmax≤1200ºС).
The tanker operates in a temperature range from -400 to +600 ºC.
There is installed electronic level sensor with output in the driver's cab.
There is a recording device in the acid truck tanker.

Техника в наличии Скачать каталог продукции Получить каталог по почте

Analogs

ACK-8.2NM KAMAZ-43118

Purchase

Программа TRADE-IN от производителя. Обмен старого автомобиля на новый Камаз.

Выгодно:

Принимаются грузовики любых производителей, без ограничений, в качестве первоначального взноса
Автомобили закупаются напрямую у владельцев
Ценовое предложение на подержанный грузовик в течении суток
Оптимальная цена на рынке за Ваш грузовик с пробегом
Надежность и гарантия юридической чистоты сделки

Удобно:

Предварительный осмотр и ценовое предложение по фотографиям
Комплексная диагностика сдаваемого грузовика силами сервисного центра
Выбор нового автомобиля у официального дилера ПАО «КАМАЗ»
Заключение договора обратного выкупа

Программа действует как для юридических так и для физических лиц.

Услуги по дооборудованию и доработке

Выполним необходимые клиенту доработки и оснастим технику дополнительным оборудованием.

Наши специалисты выполнят:

дооборудование для перевозки ГСМ;
доработки для эксплуатации в экстремально холодных условиях;
дооснащение автономными подогревателями;
монтаж кондиционеров;
установку тахографов;
монтаж дополнительных топливных баков;
доработки кабины: утепление, увеличение размера, оснащение спальным местом;
а также многое другое. К полному списку доработок...

Shipping

Delivery methods

Delivery to the CIS countries by road or rail.

Delivery to other foreign countries: marine and aircraft transport,
railway transport.

Shipping terms

If products are in stock, we can perform shipment within 3 days.
If the necessary equipment is not available, the shipment will be made within the period from 10 to 15 calendar days.

Payment

Payment methods