Home › Сatalogue › Cesspool emptying machine › MVS-10M KAMAZ-65115

Cesspool emptying machine MVS-10M KAMAZ-65115

Purchase

Defer

Capacity	10 cubic meters
Pump:	PNR-124 (744 m³/h)
Pump options:	LC-420, LC-580, PR-150, DL-180/250
Bottom opening:	hydraulic
Lifting the tank:	hydraulic
Chassis:	KAMAZ-65115 (6×4, 300 hp)
Sleeping berth:	unavailable
Equipment:	hydraulic washing system for bottom sediments
Warranty:	attached implements – 1 year

View complete specification

download PDF

trade-in

Services in equipment
re-equipment

We ensure
worldwide delivery

Specifications

Description

Tanker specifications

Capacity, cubic meter	10
Cross-section form	circle
Steel grade	09Г2С
The thickness of the metal for shells and bottoms	4 mm
Transverse	External
Breakwaters	Internal, hemispherical shape, cold-rolled flanged, offset from the welds of the body, with amplifiers in the lower part, the overlap area is not less than 50%
Structural connection of the tank with the subframe	- Rear hinges (2 PCs.). - Front pressing with a lifting hydraulic cylinder.
Structural connection of the subframe to the chassis frame	Rigid mounting, including spring compensators loaded expansion joints in the front.
Inspection of welds	- Automatic welding of the tank by the robot. - Pressure testing the test pressure. - Ultrasonic testing.
The construction of the subframe	The subframe is made of a 120x80 mm profile in the form of a solid welded structure
Design features	- Lodgments are embedded in the subframe, made in the form of a one-piece structure with a minimum number of welds, - Reinforced attachment of lodgments to the subframe with an increased contact area to give additional rigidity and strength to the entire structure; - Rubber gaskets between the tank and the lodgements; - Lining armor plate on the shell of the tank in the place where it is adjacent to the lodgments to protect the shell from abrasion.
The process vacuum neck is equipped with	- a ladder with anti-slip steps and a platform made of galvanized anti-slip sheet (the ladder and platform are removable and can be replaced, repaired, painted separately from the container); - galvanized stamped cover.
Lifting the tank	Dump truck type, using one Central front hydraulic cylinder at an angle of at least 40 degrees. The maximum lifting angle of the tank during unloading is limited by a safety valve to prevent the machine from tipping ove
Opening the rear bottom	Up, using two side hydraulic cylinders. Sealing strip in a circle. Pressing the bottom using galvanized screw clamps – 4 PCs.
Visual inspection of tank filling	Viewing window, spherical (3 PCs.) with illumination, located on the rear bottom, spherical (1 PC.) with illumination, located on the front bottom, Du-120
Materials to the paint tank	- 2-component anticorrosive polyester primer containing zinc phosphate, manufactured by DYO, Turkey. - 2 layers of industrial enamel, manufactured by DYO, Turkey.
The color of the tank	According to the customer's request

Tanker vacuum equipment

Hydraulic washing system for dense soil deposits
Vacuum pump, manufactured by JUROP	- PNR-124, air-cooled blade, capacity 744cubic meters/hour; - LC-420, vane with liquid cooling and automatic lubrication, capacity 720 cubic meters/hour; - LC-580, vane with liquid cooling and automatic lubrication, capacity 980 cubic meters/hour; - PR-150, vane with forced liquid cooling, capacity 900 cubic meters/hour; - DL-180/250/300, Cam, air-cooled, capacity 1050/1500/1800 cubic meters/hour, respectively.
Pressure-suction hoses	DU-100, length 4 m – 2 PCs. (in metal cases on the sides along the tank)
The dehumidifier is equipped with	- A pressure-vacuum gauge for monitoring the level of underpressure and excess pressure in the tank; - Ball valve for draining water and discharge pipe; - Viewing window for visual control of the water level; - The removal of the upper cover is possible without application of lifting mechanisms. The body of the dehumidifier is removable, made of steel 09G2S, 4 mm thick, has a stamped cover and bottom. It can withstand vacuum up to -0.9 kg/cm2.
Pencil cases for sleeves	Metal boxes
Vacuum equipment protection system	- Safety valve for vacuum restriction (-0.9 kg/cm2); - Overpressure safety valve (0.4 kg/cm2).
Tank overflow protection system	- Primary valve in the process neck in the form of a stainless steel ball with a diameter of 150 mm in the basket; - Secondary shut-off valve in the dehumidifier in the form of a stainless steel ball with a diameter of 150 mm in the basket; - Non-contact induction sensor MS-DUG in the neck, which reacts to the approach of the shut-off valve, as a result of which the vacuum pump drive is switched off.
Stop valve	- 4-way valve for switching modes "vacuum creation / pressure injection"; - Knife-type valve on the rear drain with manual drive DU100 with BRS 4” at the lower level of the tank; - Second knife-type valve with manual drive DU100 with BRS4" at 1/3 level for "easy filling" of the tank.
Electrical equipment	- Marker lights on top of the tank in red – 2 PCs. - lighting of the operator's working area (searchlight above the rear drain on top of the tank).
Tray for draining	Made of stainless steel with a thickness of 2 mm, has stiffening ribs
Etc	- rear safety bar to protect the shut-off valve from rear impacts; - aluminum fenders over the rear wheels.
Clean water tanks	Volume=2x0. 5 m3 (communicating). Filling the compartment through the filler neck (top filling) and through the ball valve Du-50 with an adapter to the "Bogdanov" nut in the lower part of the tank (for filling from the hydrant). The filling caps are equipped with UD-1 breathing valves with the appropriate capacity. Equipped with "Column" type level meters.
High pressure water plunger pump	Comet TW 13022 S or equivalent with hydraulic drive.
Water pump capacity, l / m	50
Max water pump pressure, MPa (ATM.)	12 (120)
Pressure gauge / fine water filter	At the outlet of the pump / inlet to the pump
Regulating valve	VB 85/310; input 1/2", output 1/2" with flywheel rated at 80 l/min, 310 bar
Monitor gun with extension spike (400 mm) and washout nozzle	1 (one) set
Drum for water pressure hose	Inertial, with automatic stacking
Diameter / length of high pressure hose, mm	D=12 (AGRESSOR), L=15 000
Equipment drive	Hydraulic, consists of: - Power take-off box "ZF" with double-circuit plate hydraulic pump, - Hydraulic motor, - Set of high-pressure hoses and metal oil pipes, - Multi-position hydraulic distributor with sections with and without latches, - Divertors, - Safety valve, - Oil cooling radiator with thermal sensor (depending on the type of vacuum pump), - expansion hydraulic tank. The drive design allows simultaneous work on hydraulic washing and waste collection in nominal values without loss of pumping equipment

KAMAZ-65115 chassis specification

Model
Additional equipment	power take-off box (COM)
Engine
Model	Cummins ISB6.7E5 300
Maximum net torque, Nm	1087
at crankshaft rotation speed, rpm	1300
Maximum net horsepower, kW (h. p.)	215 (300)
at crankshaft rotation speed, rpm	2500
Engine displacement, L	6.7
Cylinder arrangement and number	row, 6
Ratio	17,3
Type	turbocharged diesel
Cab
Configuration	day-cab
Type	located above the engine, with a high or low roof (depending on the configuration)
Wheels and tyres
Rim size	7,5-20 or 7,5-22,5 or 8,25-22,5 (depending on specification)
Tyre size	10.00 R16 or 11.00 R16 or 11.00 R16 (depending on specification)
Wheel type	disk wheels
Tyre type	pneumatic, tubeless
Transmission
Model	ZF 9S1310
Type	mechanical
Control	mechanical, remote control
Number of gears	9
Release and neutralization system
Tank capacity with a neutralizing liquid	35
Type	Silencer combined with catalytic Converter
Fuel system
Fuel tank capacity, L	350 or 210 or 500 (depending on specification)
Clutch
Actuation	hydraulic, with pneumatic booster
Type	diaphragm, single-disk, mod. ZF&SACHS MFZ 430
Brakers
Drive	pneumatic
Dimensions: drum Ø, mm	400
Brake lining width, mm	140
Characteristic of gvw vehicle
Outer turning radius between walls, m.	9,7
Maximum speed, no less, km/h	100
Wheel arrangement	6×4
Climbing angle, no less, %	25 (14°)
Electrical equipment
Batteries, V/A hour	2×12/190
Generator, V/W	28/2000
Voltage, V	24

The vacuum silt-sucking machine is designed for collecting municipal waste from the ground surface, from pits and buried tanks, cleaning wells, storm and sewer networks, settling tanks from silt and transporting the collected mass to disposal sites.

MVS-10M can be manufactured in all climatic versions. It is possible to manufacture a tank with an opening bottom or without such a function.

Vehicles are designed for operation on the General network of roads of 1-3 categories (SNiP 11-D5).

Components of the tank:

tank (round section, 09G2S),
vacuum installation (base, pump, oil separator, dehumidifier, pipelines),
hydraulic washing system,
electrical equipment.

Additional equipment:

quick-Release process hatch for tank cleaning.
Additional filler neck at the rear of the tank.
Heating of the gate valve from the engine exhaust system.
Four - way lighting system for the work area.
Tool box of own production on the rear overhang of the car frame.
Technical features of the vacuum machine

Vacuum sludge pump MVS-10M — KAMAZ-65115 car with mounted special equipment placed on it.

Tank vacuum — tank round cross-section. The structure is welded consisting of two bottoms and a shell.

On top of the tank is a neck closed with a lid. The cover has a safety valve, a vacuum valve and a tube for removing air when it is discharged or pressurized. The safety valve is mounted in the neck cover and serves to limit the pressure in the tank. The vacuum valve consists of a cover, a body, and a valve designed to limit vacuuming.

At the rear, at the end of the tank, there is a receiving hatch, which is designed for filling and draining liquid. The hatch is hermetically closed with a lid on which the tap and the pressure head with a plug are fixed.

For convenient maintenance of the tank neck by the operator, there is a service platform made of perforated sheet with anti-slip effect and a lifting ladder.

The tanker is equipped with a pressure-suction sleeve, which is located in the transport position in the pencil case.

Rated voltage in the equipment network is 24 V, direct current from the car network.

Security tool

Placement of the chassis exhaust silencer — according to the chassis configuration.
Fuel tank protection — according to the chassis configuration.
Grounding device — 1 PC. (ground circuit on the bump).
First aid kit — 1 PC.
Anti — rollback stop- 2 PCs. with brackets (ADR p. 8.1.5.2).
Rear protective device (bump) 1 PC. (GOST R 41.58).

Техника в наличии Скачать каталог продукции Получить каталог по почте

Analogs

MVS-5+1 KAMAZ-43253

Purchase

MVS-7,5М KAMAZ-43253

Purchase

AKNS-8 (+1) KAMAZ-53605

Purchase

MVS-10 KAMAZ-53605

Purchase

AKNS-10 KAMAZ-65115

Purchase

MVS-8+2 KAMAZ-53605

Purchase

MVS-10 KAMAZ-43118 Hydraulic washing

Purchase

MVS-10M KAMAZ-43118

Purchase

MVS-10+2 KAMAZ-43118 Cummmins

Purchase

AKNS-10 KAMAZ-65115 АТЕХ

Purchase

yet 8 items

Программа TRADE-IN от производителя. Обмен старого автомобиля на новый Камаз.

Выгодно:

Принимаются грузовики любых производителей, без ограничений, в качестве первоначального взноса
Автомобили закупаются напрямую у владельцев
Ценовое предложение на подержанный грузовик в течении суток
Оптимальная цена на рынке за Ваш грузовик с пробегом
Надежность и гарантия юридической чистоты сделки

Удобно:

Предварительный осмотр и ценовое предложение по фотографиям
Комплексная диагностика сдаваемого грузовика силами сервисного центра
Выбор нового автомобиля у официального дилера ПАО «КАМАЗ»
Заключение договора обратного выкупа

Программа действует как для юридических так и для физических лиц.

Услуги по дооборудованию и доработке

Выполним необходимые клиенту доработки и оснастим технику дополнительным оборудованием.

Наши специалисты выполнят:

дооборудование для перевозки ГСМ;
доработки для эксплуатации в экстремально холодных условиях;
дооснащение автономными подогревателями;
монтаж кондиционеров;
установку тахографов;
монтаж дополнительных топливных баков;
доработки кабины: утепление, увеличение размера, оснащение спальным местом;
а также многое другое. К полному списку доработок...

Shipping

Delivery methods

Delivery to the CIS countries by road or rail.

Delivery to other foreign countries: marine and aircraft transport,
railway transport.

Shipping terms

If products are in stock, we can perform shipment within 3 days.
If the necessary equipment is not available, the shipment will be made within the period from 10 to 15 calendar days.

Payment

Payment methods