Home Сatalogue AKNS MVS-10 KAMAZ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605
МВС-10 КАМАЗ-53605

Cesspool emptying machine MVS-10 KAMAZ-53605

Capacity 10 cubic meters
Pump: PNR-122
Pump options: LC-420, LC-580, PR-150, DL-180/250
Bottom opening: hydraulic
Lifting the tank: hydraulic
Chassis: KAMAZ-53605 (4×2, 285 hp)
Sleeping berth: unavailable
Equipment: hydraulic washing
Warranty: attached implements – 1 year

 

Tanker specifications

Capacity, cubic meter 10
Cross-section form circle
Bottom opening hydraulic
Lifting the tank hydraulic
Steel grade 09G2S (09Г2С) (low-allow steel with a minimum thickness of 5 mm)
Side framing external frame
Breakwaters Internal, reinforced, in the upper part of the tank, with an overlap of no more than 1/3 of the cross-section area.
Structural connection of the tank with the subframe
- Rear hinges-hinges (2 PCs.).
- Front pressure using a lifting hydraulic cylinder.
Structural connection of the subframe to the chassis frame
- Rigid bolted connections, including spring-loaded expansion joints in the front.
- A rubber damper is provided between the frame and the subframe.
Welding and seam control
- Automatic welding of the shell by a robot.
- Testing with a test pressure of 10 atmospheres.
- Ultrasonic testing.
The design of the subframe The subframe is made of a rectangular section of 120×80×5 mm in the form of a solid welded structure.
Design features
- Lodges are embedded in the subframe, made in the form of an all-round structure with a minimum number of welds.
- Reinforced mounting of the beds to the subframe with an increased contact area to give additional rigidity and strength to the entire structure.
- Rubber seals between the tank and the lodges.
- Lining armor plate on the shell of the tank at the place where it is adjacent to the bed, to protect the shell from abrasion.
Inscriptions FLAMMABLE-on the left, right sides, on the rear bottom

Installed pumps specification

Characteristic PNR-122 LC-420 LC-580 PR-150 DL-180/250/300
Delivery volume, m3/h 730 720 980 900 1050/1500/1800

Tanker vacuum equipment

Pump drive from COM /from DOM/ hydraulical drive /drive shaft
Delivery-suction hoses 4 pcs., DU 100 mm, length 3 meters with BRS Camlock 4”
Cases for hoses packaging Metal cases at both sides of tanker
Vacuum unit protecting components The first shutdown valve in a filler pipe,
the second shutdown valve in a receiver,
vacuum valve (-0,8 kg/cm2),
pressure relief valve (0,4 kg/cm2),
MS-DUG non-contact induction sensor in the neck that reacts to the approach of the shut-off valve and disconnects the vacuum pump drive.
Hydraulic washing system for dense soil deposits
A compartment under the clean water V=1 m3 Filling the compartment through the filler neck (top filling) and through the Du-50 ball valve with an adapter to the Bogdanov nut in the lower part of the container (for filling from the hydrant)
High pressure water plunger pump UDOR 50/12 (Italy) with hydraulic drive.
Water pump capacity, l / min 50
Pressure gauge / fine water filter At the outlet of the pump / inlet to the pump
Regulating valve VB 200/150; input 1", output 1" with flywheel designed for 200 l / min, 170 bar
Sleeve drum Inertial, self-winding.
Diameter / length of high pressure hose, mm d=12 (AGRESSOR), L=15 000
Tank cleaning Flushing nozzles inside the tank (4 PCs.) with water supply from a high-pressure pump.

KAMAZ-53605-48 chassis specification

Model
Additional equipment
power take-off box (COM)
Engine
Model Cummins ISB6.7E5 300
Maximum net torque, Nm 1087
at crankshaft rotation speed, rpm 1300
Maximum net horsepower, kW (h. p.) 215 (300)
at crankshaft rotation speed, rpm 2500
Engine displacement, L 6.7
Cylinder arrangement and number row, 6
Ratio 17,3
Type turbocharged diesel
Cab
Configuration day-cab
Type located above the engine, with a high or low roof (depending on the configuration)
Wheels and tyres
Rim size 7,5-20 or 7,5-22,5 or 8,25-22,5 (depending on specification)
Tyre size 10.00 R16 or 11.00 R16 or 11.00 R16 (depending on specification)
Wheel type disk wheels
Tyre type pneumatic, tubeless
Transmission
Model ZF 9S1310
Type mechanical
Control mechanical, remote control
Number of gears 9
Release and neutralization system
Tank capacity with a neutralizing liquid 35
Type Silencer combined with catalytic Converter
Fuel system
Fuel tank capacity, L 350 or 210 (depending on specification)
Clutch
Actuation hydraulic, with pneumatic booster
Type diaphragm, single-disk, mod. ZF&SACHS MFZ 430
Brakers
Drive pneumatic
Dimensions: drum Ø, mm 420
Brake lining width, mm 180
Characteristic of gvw vehicle
Outer turning radius between walls, m. 8
Maximum speed, no less, km/h 90
Wheel arrangement 4×2
Climbing angle, no less, % 25 (14°)
Electrical equipment
Batteries, V/A hour 2×12/190
Generator, V/W 28/2000
Voltage, V 24

 

Cesspool emptying machine are designed for wastewater gathering, dewatering, transportation for recycling, and also for filling, transportation and discharging of any process liquids.
 
MVS-10 may be performed for all climate zones, with opening bottom or not. The machinery is designed for operation  at the general road network of 1-3 categories (according to Russian construction rules and regulations SNiP 11-D5).

Tanker component parts:

  • cistern (circle cross-section, steel grade 09G2S),

  • vacuum pump (base, pump, oil separator, dehumidifier, pipelines),

  • electrical equipment,

  • hydraulic washing system

Cesspool emptying machine specifications
ACNS-8 (+1) is a cistern installed on “KAMAZ” chassis.
 
Vacuum cistern – is a circular cross-section tanker, a welded construction of two bottoms and drum shell.
On the top of a tanker there is a filler pipe with a closed filler cap. On a cap there are relief valve, vacuum valve and a tap for air exhausting while creating pressure or underpressure. Pressure-relief valve on the filler cap controls pressure limit in the tanker. Vacuum valve includes a cap, a case and a valve. It controls vacuum limits. At the back bottom of the tanker there is a filler flap for liquids filling and outflow. The filler flap is tightly closed with a cap, on which there is a tap and delivery flap with cover plug.
 
There is an operating platform with ladder for convenient filler pipe maintenance.
 
The tanker is equipped with delivery-suction hose, which is packed in transportation case. Nominal voltage in the equipment network is 24 V, DC is provided by the automobile.

Performance:

  • Quick-release process hatch for tank cleaning.

  • Additional filler pipe.

  • Heating of the footvalve with an IC-engine exhaust system.

  • 4 types of workplace illumination around the vehicle.

  • Service platform for the tank hatch made of perforated sheet with anti-slip effect.

  • Instrument box on the rear chassis frame.

Security facilities:

  • Chassis exhaust silencer is placed according to chassis configuration.

  • Fuel reservoir protection - according to chassis configuration.

  • Grounding system — 1 pcs. (ground circuit on a rear protection).

  • First aid kit — 1 pcs.

  • Wheel blocks — 2 pcs. With brackets (ADR (rus. ДОПОГ) 8.1.5.2).

  • Rear protection — 1 pcs. (GOST R 41.58).

Программа TRADE-IN от производителя. Обмен старого автомобиля на новый Камаз.

Выгодно:

  • Принимаются грузовики любых производителей, без ограничений, в качестве первоначального взноса
  • Автомобили закупаются напрямую у владельцев
  • Ценовое предложение на подержанный грузовик в течении суток
  • Оптимальная цена на рынке за Ваш грузовик с пробегом
  • Надежность и гарантия юридической чистоты сделки

Удобно:

  • Предварительный осмотр и ценовое предложение по фотографиям
  • Комплексная диагностика сдаваемого грузовика силами сервисного центра
  • Выбор нового автомобиля у официального дилера ПАО «КАМАЗ»
  • Заключение договора обратного выкупа

Программа действует как для юридических так и для физических лиц.

Услуги по дооборудованию и доработке

Выполним необходимые клиенту доработки и оснастим технику дополнительным оборудованием.

Наши специалисты выполнят:

  • дооборудование для перевозки ГСМ;
  • доработки для эксплуатации в экстремально холодных условиях;
  • дооснащение автономными подогревателями;
  • монтаж кондиционеров;
  • установку тахографов;
  • монтаж дополнительных топливных баков;
  • доработки кабины: утепление, увеличение размера, оснащение спальным местом;
  • а также многое другое. К полному списку доработок...

Shipping

Delivery methods

Delivery to the CIS countries by road or rail.

Delivery to other foreign countries: marine and aircraft transport,
railway transport.

Shipping terms

  • If products are in stock, we can perform shipment within 3 days.
  • If the necessary equipment is not available, the shipment will be made within the period from 10 to 15 calendar days.

Payment

Payment methods

  • Foreign transactions,
  • leasing,
  • cashless transactions.

Terms of payment

Payment is made when the order is ready for shipment. The shipment is possible only at 100% payment.

Our partners

Trust us

С нами выгодно сотрудничать!

Гибкая система скидок и условий оплаты
Доставка по всей России любым способом, доставка в страны СНГ и Африки
Сформированный склад запчастей постоянного спроса
Бесплатная выездная сервисная бригада на срок гарантии
Лояльность всех лизинговых компаний РФ
Переоборудование и любые доработки спецтехники
Собственная служба технического контроля
Увеличенный срок эксплуатации цистерн – 5 лет