Tanker for oil and technological solutions insulated ATSM-12 KAMAZ 43118

от   0  p

Tanker specifications

Capacity, cubic meter	12
Max liquid density, tonn/cubic meter	1,03
Number of sections	1
Steel grade	stainless steel
Plating tanks	stainless steel/carbon steel with paint
Thermal insulation	FRP foam
The thickness of insulation, mm	50
Conditional passage of the drain pipeline, mm	50
Сlose fitting valve	the bottom valve, one for each compartment
Bottom valve control	from the back, from the compartment

Installed pumps specification

Characteristic	SCL-00A (СЦЛ-00А)
Pump capacity, cubic meter per hour	21,6
Pump head, meter	30
Pump power, kW	5,5
Nominal speed, rpm	1450
Pump efficiency, %	35
Self-suction lift, m	4,5
Mass, kg	62

KAMAZ-43118 chassis specification

Engine
Model	KAMAZ-740.662
Cylinder diameter and piston stroke, mm	120/130
Maximum net torque, Nm (kgfm)	1275 (130)
at crankshaft rotation speed, rpm	1300
Maximum net horsepower, kW (h. p.)	221 (300)
at crankshaft rotation speed, rpm	1900
Engine displacement, L	11,76
Cylinder arrangement and number	V-shaped, 8
Fuel feed system	Common Rail
Degree of compression	17
Type	turbocharged diesel, with aftercooling
Cab
Configuration	day-cab or sleeper cab (depends on truck configuration)
Type	high or low roof, over the engine (depends on truck configuration)
Wheels and tyres
Rim size	10.00-20 или 12.2-20,9 (depending on specification)
Tyre size	390/95 R20 или 425/85 R21 (depending on specification)
Wheel type	disk wheels
Tyre type	pneumatic, with pressure control
Transmission
Model	ZF 9
Gear ratios	1-9,48; 2-6,58; 3-4,68; 4-3,48; 5-2,62; 6-1,89; 7-1,35; 8-1,00; 9-0,75; ЗХ-8,97
type	mechanical, 9-speed
Control	mechanical, remote control
Number of gears	9
Transfer case
Type	mechanical, two-speed with interlocking differential
Control	pneumatic
Fuel system
Fuel tank capacity, L	210 или 350 или 210+210 или 350+210 (depending on specification)
Clutch
Actuation	hydraulic, with pneumatic booster
Type	diaphragm, single-disk, mod. ZF&SACHS MF 430
Brakers
Drive	pneumatic
Dimensions: drum diameter, mm	400
Brake lining width, mm	140
Weight characteristics
Curb weight, kg	11 225
Gross weight, kg	20 160
Габаритные размеры
Length, mm	8 600
Width, mm	2 550
Height, mm	3 030
Characteristic of gvw vehicle
Outer turning radius between walls, m.	11,5...12,9
Maximum speed, no less, km/h	90
Climbing angle, no less, %	31
Electrical equipment
Batteries, V/A hour	2×12/190
Generator, V/W	28/3000
Voltage, V	24
Additionally	Heating of the pump compartment, drain pipes and wiring from exhaust gases

 

Tankers for oil and technological solutions insulated ACTM are designed for transportation of process water, clay and salt solutions, their supply to mobile pumping units during various washing and selling operations in oil and gas wells.

Attention! While driving the tank should be completely empty or full, since the movement of partially filled tank can lead to overturning.

Tankers for oil and technological solutions insulated specifications

A specialized vehicle includes a tanker installed on “KamAZ” chassis.

Insulated tank ATSM-10 consists of one section, the base and covering the service, located at the rear.

The tank has one luke intended for filling, disinfection and inspection of the inner surface of the shell. Luke closes thermally insulated lid.

Pipelines have effective protection against freezing in winter. The tank has a sealed compartment with pipelines.

Tanker truck is safe to operate, equipped with handrails and convenient service platforms, having a perforated surface against sliding under any climatic conditions.

NPO “Vektor” designs and manufactures tanks to the specific needs of customers: on request we can change the design.

The pumping unit provides three modes of operation:

• filling the tank;

• discharge of liquid from the tank;

• pumping liquid, bypassing its own tank.

The production versions of the tank:

• Tank thermal insulation: FRP foam, thermal insulation thickness — 50 mm.

• Anti-corrosion treatment of the tank.

• The material of the outer cladding of the tank: stainless steel/carbon steel with paintwor

Improvements equipment:

• Water heating system (water heating equipment, three-circuit ten).

• Washing equipment (front washing rack, rear washing rack).

• Fire extinguishing system (diesel pump for pumping water).