The vacuum silt-sucking machine is designed for collecting municipal waste from the ground surface, from pits and buried tanks, cleaning wells, storm and sewer networks, settling tanks from silt and transporting the collected mass to disposal sites.
MVS-14 can be manufactured in all climatic versions. It is possible to manufacture a tank with an opening bottom or without such a function.
Vehicles are designed for operation on the General network of roads of 1-3 categories (SNiP 11-D5).
Components of the tank:
- tank (round section, 09G2S),
- vacuum installation (base, pump, oil separator, dehumidifier, pipelines),
- hydraulic washing system,
- electrical equipment.
Additional equipment:
- quick-Release process hatch for tank cleaning.
- Additional filler neck at the rear of the tank.
- Heating of the gate valve from the engine exhaust system.
- Four - way lighting system for the work area.
- Tool box of own production on the rear overhang of the car frame.
- Technical features of the vacuum machine
Vacuum sludge pump MVS-14 — MAZ-631226 car with mounted special equipment placed on it.
Tank vacuum — tank round cross-section. The structure is welded consisting of two bottoms and a shell.
On top of the tank is a neck closed with a lid. The cover has a safety valve, a vacuum valve and a tube for removing air when it is discharged or pressurized. The safety valve is mounted in the neck cover and serves to limit the pressure in the tank. The vacuum valve consists of a cover, a body, and a valve designed to limit vacuuming.
At the rear, at the end of the tank, there is a receiving hatch, which is designed for filling and draining liquid. The hatch is hermetically closed with a lid on which the tap and the pressure head with a plug are fixed.
For convenient maintenance of the tank neck by the operator, there is a service platform made of perforated sheet with anti-slip effect and a lifting ladder.
The tanker is equipped with a pressure-suction sleeve, which is located in the transport position in the pencil case.
Rated voltage in the equipment network is 24 V, direct current from the car network.
Security tool
- Placement of the chassis exhaust silencer — according to the chassis configuration.
- Fuel tank protection — according to the chassis configuration.
- Grounding device — 1 PC. (ground circuit on the bump).
- First aid kit — 1 PC.
- Anti — rollback stop- 2 PCs. with brackets (ADR p. 8.1.5.2).
- Rear protective device (bump) 1 PC. (GOST R 41.58).