The tank truck in AKNS-10-65115 is used for cleaning wells, storm and sewer networks, sedimentation tanks from silt and transporting the collected mass to disposal sites.it can also be used in other industries where it is necessary to collect and transport various liquid products. The drive design allows simultaneous work on hydraulic washing and waste collection in nominal values without loss of pumping equipment power.
The AKNS-10-65115 tanker is delivered in the following configuration:
- dump truck type tank.
- Compressor module (PVT-200 Vacuum compressor, silencer, injection filter, suction filter, compressor drive).
- The system of protection of the tank from the overflow.
- Intake pipe with gate valve – 2 PCs.
- Technology the neckline.
- Drain chute.
- Pressure-suction hoses – 1 PC.
- Pencil cases for laying sleeves – 2 PCs.
Additional equipment of the AKNS-10-65115 tank truck:
- Production of the tank from stainless steel.
- System for washing away dense soil deposits — (high pressure pump GC 50/12 (UDOR, Italy) — pressure 120 ATM., water flow rate up to 50 l/min, stainless steel clean water tank, high pressure hose 15 m long. on an inertial coil, monitor-gun).
- Rotary console (JUROP, Italy) — 300° rotation, 15° rise and fall with remote control.
- The console is rotary with a sleeve – rotation around the axis by 60° in each direction manually, up and down — using a hydraulic cylinder, fixing in seven positions using a pneumatic cylinder.
- Electromechanical vibrator for beating the solidified mass from the tank shell.
- A nozzle on the intake sleeve with a smaller diameter dedicated sleeve for sucking air during injection (the injection depth when using such a nozzle increases to 20 m).
- Hydraulic clamps for the rear bottom of the tank – 4.